Contact Us
Have a question or a project in mind?
Whether you’re planning a new project, exploring our precast wall solutions, or need technical support, our team is ready to assist you.
- Level 16, Plaza Osk, Jln Ampang, Hampshire Park, 50450 Kuala Lumpur, Wilayah Persekutuan
- 03-2177 1838
- enquiry.central@acotec.com.my
Need more help?
Frequently Asked Question (FAQ)
- Latest Architect and Structural drawings from clients.
- Our standard lead time is well-stipulated in our commercial proposal as below :-
However, customized panels take longer time for delivery. - Acotec : 4 – 6 weeks
- AcoLITE : 6 – 8 weeks
- Our product range is environmental friendly with certified Green Label product that comprises energy saving and recycled materials.
- Acotec – IBS product which equivalent to green product. Our production process is dry-mix and not involve any energy process,
whereby natural curing takes place and thus, low carbon emission. - AcoLITE – We reduce the usages of natural resources by cutting down mining sand and aggregate, with the replacement of LECA.
- Acotec can reduce and simplify the construction time and process, less manpower but high productivity and semi-complete finishing.
- The installation speed is 6 times faster.
- For the same productivity, Acotec only required 4 pax of manpower, unlike conventional which need 8 – 12 pax workers,
whereby the preliminary cost can be saved with the minimal wet works & less machinery. - No plastering is required, as we are semi-finished product.
- Acotec is 10 – 15% lower than brickworks.
- Yes.
Acotec price is inclusive all accessories without any hidden cost except installation.
- Landed property
- High-rise
- Industrial
- Government
- Reduce oversize foundation and beams
- Flexible architecture design
- Hackable for renovation
- User-friendly
- The weight of Acotec panel is around 140 kg/m2, which is 40% lighter than bricks / cast in-situ walls.
However, any tools / machinery required for handling panels by installers subject to terms with customer
- Water seepage happens whenever there is connection between window frame and concrete, as well as the bottom area.
• External area. User can prevent and reduce the water seepage issue with the application of bituminous coating.
• Toilet area. User is guaranteed with standard two (2) years of waterproofing warranty.
- Not necessary, as subjects to the contract.
However, this shall be done by the installation, which means the engagement of the same installer team.
- Acotec is the semi-finished product and the panel quality is controlled at our factories.
- Our recommended internal wall finishing skim coat is minimum 5mm thk. (Base: 3 – 4mm thk. & Finished Work: 1 – 2mm).
However, the finishing work subjects to developer’s requirement. For example, QLASSIC score.
- The site wastages can be controlled and managed with following options :
1. Utilize the cut panels at the area for similar length.
2. Recycle the broken panels at lintel area.
3. Use standard size of panel during design stage.
- Get technical involved during the initial stage to use for the standard size of panel.
- Check with factory on the current production panel size if falls under the same group.
- Communicate with Architect and Main Contractor with alternative proposal to enlarge the beams, in the event if the variance is insignificant.
- Depends.
However, we encourage customer to opt for standard size. Cut-to-size will only be incurred, in the event if there is project conversion.
- Acobuilt is the load bearing system, whereby we redesign column by using stiffener at L & T joints and every 3m of long span wall. Beam will be replaced by capping beam.
- Yes.
However, you may need to refer back to project consultant for design-wise, as our system only can support for the conversion of non-load bearing wall.
- 125mm thickness of panel is available.
- Level 16, Plaza Osk, Jln Ampang, Hampshire Park, 50450 Kuala Lumpur, Wilayah Persekutuan
- 03-2177 1838
- enquiry.central@acotec.com.my
